Entrance doors Porta

DOOR LEAF CONSTRUCTION

The door leaf consists of a finger jointed softwood frame filled with special construction Porta with inner steel bars, covered from both sides with composite boards of aluminium and HDF.

LEAF EDGE PROFILE

Outside leaf rail veneered to match leaf color. The leaf itself is made in the rebate version.

FINISHING

The leaf is veneered with HQ CPL laminate 0.7 mm thick, natural veneer (flush door leaves only) or PVC veneer (flush and slot-milled).

MODELS

Single leaf: flush and slot-milled. Two types (type I and II), depending on differences in resistance to fire.

ACCESSORIES – included in the leaf price

• multi-bolt mortise lock;
• two anti-burglary „C”-class cylinders;
• handle with anti-burglary escutcheon;
• upper escutcheon;
• three reinforced, silver pintle hinges;
• four anti-leverage security bolts;
• silver eye-viewer (optional);
• the lock, cylinder and escutcheon used are „C”-class certified;
• the leaf may be shortened by 60 mm maximum;
• additionally: type II – thermo-swelling seal on side and upper edges (except for the lower edge);
• door frame is equipped with a wider type of a stainless steel threshold (120 mm);

LEAF SIZES

”80”,”90”, ”100”

RECOMMENDED DOOR FRAME

Angle-bar metal door frame is made of profile 100 mm wide. Is made of steel, coated on both sides with 1.5 mm thick zinc layer and equipped with: fire-proof gasket, 8 dowels, threshold made of stainless steel (120 mm). The frame is covered with powder paint in one out of standard colours: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028). Door frame is available in two versions:

• for setting on the ready fl oor – level “0”;
• for cementing in the fl oor – level “-30”;