Technical doors Porta

DOOR LEAF CONSTRUCTION EI 30

The leaf frame is made of exotic timber dressing. The core consists of fire resistant chipboards positioned in layers. The leaf skin is an HDF board. Glazed leaves use multi-layer, transparent, fi re resistant combined EI 30 glass. The glazing is supported by an internal frame made of hardwood or exotic wood.

LEAF EDGE PROFILE

Both side edges and higher part are covered with skirting tape in the color of the door leaf. The leaf itself is made in the rebate version.

FINISHING

The leaf is veneered with HQ CPL laminate 0.7 mm thick, natural veneer (fl ush door leaves only) or PVC veneer (fl ush and slot-milled). MDF frame is veneered using the colour of a door leaf.

MODELS

Single doors: full – fl ush or slot-milled and double EI 30.

ACCESSORIES – included in the leaf price

• three pintle hinges;
• lock for cylinder insert;
• fi re-proof EI 30 pane (width is not dependent on leaf size);
• thermo-swelling seal in door leaf;
• fi re resistant seal in door frame;
• automatic threshold seal in the leaf bottom edge (only EI30);
• door frame;

ACCESSORIES – to be charged additionally (pages 123-126)

• handle with escutcheon;
• quarter round (MDF door frame);

LEAF SIZES (table 3)

Single leaf: „60”, „70”, „80”, „90”, „100” Double leaf: „120” ÷ „200”

RECOMMENDED DOOR FRAMES

• MDF door frame of profi le 100 mm wide, equipped with adjustable hinges in leaf color, in accordance with door leaf color range.
• Angle-bar metal door frame of profi le 100 mm wide, made of both sides zinc-coated steel 1.5 mm thick. It is painted with power paint in one of standard colours: white (RAL 9016), grey (RAL 7047), cream (RAL 1001), brown (RAL 8028). It is equipped with assembly dowels and prepared for installation of self-closer mechanism. Door frame is available in two versions: level “0” or level “-30”.1