Interior doors Porta

DOOR LEAF CONSTRUCTION

The door leaf is filled with stabilizing ‘honeycomb’ core or perforated chipboard framed with coniferous plywood, reinforced with internal plywood frame. Frame with filling is covered from both sides with HDF board. In glazed models is used hardened mat pane with a thickness 8 mm, which is an element of door construction.

LEAF EDGE PROFILE

“K” profi le leaf edge. Both side edges and the upper edge of the leaf covered with leaf-colored skirting tape.

FINISHING

The door leaf is veneered with Portadecor veneer. MDF frame is veneered using the colour of a door leaf.

MODELS

Single-or double-leaf in all patterns. Single-leaf sliding door are made without hinges and rebate. The lower part of the frame has a grove for the floor-mounted guide (included in the system). Door leaves from group 2 have an additional c-section metal rail on the leaf for guiding.

ACCESSORIES – included in the leaf price

• two standard pintle hinges;
• three hinges for a leaf of dimension ”100” and ”110”;
• lock: for regular key, bathroom lock or for cylinder insert;
• hardened mat pane (width is not dependent on leaf size);
• round fl ush handle (for sliding doors);

ACCESSORIES – to be charged additionally

• ventilation undercut 1, grid or sleeves;
• handle with escutcheon;
• third hinge for the leaf dimensions ”60”, ”70”, ”80” or ”90”;
• preparation for shortening up to 60 mm;
• hinge covers;
• hook lock with side handles (for sliding doors);

LEAF SIZES

Single leaf: „60“, „70“, „80“, „90“, „100“, „110”

Double leaf: „120“ ÷ „200“

RECOMMENDED DOOR FRAMES

• Minimax door frame, fixed width: 60mm and 100mm;
• Adjustable Porta SYSTEM door frame;
• Adjustable PRESTIGE door frame;
• Metal door frame;